金属加工産業向け製品レンジ

MACHINE TOOL

PRODUCTS	DESCRIPTION	Product Data Sheet
DROSERA MS	Multipurpose range for machine tools lubrication: slideways, feed and gear boxes, hydraulic, spindle movements (depending on viscosity grade).	お問い合わせください。
DROSERA FB 68	Biocide reinforced way lubricant.	お問い合わせください。
DROSERA HXE 68	Way lubricant specifically developed for machines equipped with synthetic slideways and operating with soluble cutting fluids.	お問い合わせください。
DROSERA HXE 220	Way lubricant specifically developed for machines equipped with synthetic slideways and operating with soluble cutting fluids.	お問い合わせください。

NEAT CUTTINGS OILS

PRODUCTS	DESCRIPTION	Product Data Sheet
VALONA GR 3005	Lapping, superfinishing and grinding of high-carbon steels	お問い合わせください。
VALONA GR 3008	Lapping, superfinishing and grinding of high-carbon steels	お問い合わせください。
SCILIA MS 3040	Mild cutting operations and machine tools lubrication. Well suited to copper and copper alloys.	お問い合わせください。
VALONA MS 5020	Precision turning and common machining operations on copper or aluminium alloys, and up to hard steel.	お問い合わせください。
VALONA ST 5022	Precision turning and common machining operations on ferrous alloys up to bearing steel.	お問い合わせください。
VALONA MS 5009	Precision turning of copper or aluminium alloys, low-carbon and medium-high-carbon steels.	お問い合わせください。
VALONA AU 5510	Dedicated to precision turning and common machining operations on copper and aluminium alloys. Also recommended for grinding.	お問い合わせください。
VALONA MS 7023	Heavy and very heavy duty machining of all materials from copper to special and refractory steels. Suitable for titanium machining.	お問い合わせください。
VALONA ST 9520	Difficult internal operations: gear hobbing and grinding of highly alloyed or refractory steels and titanium alloys.	お問い合わせください。
VALONA BR 9015	High-speed broaching of highly alloyed steels and other very heavy duty machining operations.	お問い合わせください。
VALONA MQL 5035	Minimum quantity lubrication. Suitable for heavy and very heavy duty machining operations on all materials from copper to titanium.	お問い合わせください。

PRELUBES

PRODUCTS	DESCRIPTION	Product Data Sheet
FINAROL B5746	Protection and little-severe deformation of the electrozinc-coated sheet steel	お問い合わせください。

QUENCHING OILS

PRODUCTS	DESCRIPTION	Product Data Sheet
DRASTA C 1000	Hardening of steels possessing good quenching power. Hardening of cemented or carbonitrated steels.	お問い合わせください。
DRASTA C 1500	Hardening of steels possessing good quenching power. Hardening of cemented or carbonitrated steels.	お問い合わせください。
DRASTA C 5000	Hardening of medium-to-good quenchabilty steels.	お問い合わせください。
DRASTA C 7000	Difficult internal works: gear hobbing, grinding of highly alloyed, refractory steels and titanium alloys	お問い合わせください。
DRASTA M 7000	Hardening of steels possessing good quenching power. Hardening of cemented or carbonitrated steels.	お問い合わせください。
DRASTA H 7000	Hardening of steels possessing good quenching power. Hardening of cemented or carbonitrated steels. Hardening of parts where one wishes to avoid deformations, quenching cracks.	お問い合わせください。
DRASTA MAX C	Quench accelerator concentrate for cold quenching oils.	お問い合わせください。
DRASTA MAX H	Quench accelerator concentrate for hot and semi-hot quenching oils.	お問い合わせください。
DRASTA SY 600	CWater hardening retarders for hardening of parts designed for tool manufacture, car industry, agriculture or gardening.	お問い合わせください。

ROLLING OILS

PRODUCTS	DESCRIPTION	Product Data Sheet
LUBRILAM S 31 L	Narrow cut rolling base for semi-finishing to finishing operations	お問い合わせください。
LUBRILAM S 40 L	Viscous rolling base for preliminary work operations	お問い合わせください。
LUBRILAM CLEANER	Air purification oil	お問い合わせください。
LUBRILAM C 3	Concentrate of alcohol-type performance additives to increase the smoothness of the rolling base	お問い合わせください。
LUBRILAM C 6	Concentrate of ester-type performance additives to increase the smoothness of the rolling base	お問い合わせください。

RUST PREVENTION

PRODUCTS	DESCRIPTION	Product Data Sheet
OSYRIS 1000	Oily	お問い合わせください。
OSYRIS DWX 1000	Oily after evaporation of the solvent	お問い合わせください。
OSYRIS 3000	Oily	お問い合わせください。
OSYRIS DWX 3000	Oily after evaporation of the solvent	お問い合わせください。
OSYRIS DWY 3500	Oily after evaporation of the solvent	お問い合わせください。
OSYRIS DWX 5000	Oily after evaporation of the solvent	お問い合わせください。
OSYRIS DWY 5500	Oily after evaporation of the solvent	お問い合わせください。
OSYRIS DWX 7000	Oily after evaporation of the solvent	お問い合わせください。
OSYRIS X 9100	Varnish after evaporation of the solvent	お問い合わせください。
OSYRIS DWX 9000	Waxy after evaporation of the solvent	お問い合わせください。
OSYRIS DWL 3550	Oily after evaporation of the solvent	お問い合わせください。

SOLUBLE FLUIDS

PRODUCTS	DESCRIPTION	Product Data Sheet
LACTUCA LT 3000	Conventional machining of free-cutting brass, copper alloys and high-grade carbon steels	お問い合わせください。
LACTUCA MS 5000	Conventional machining of aluminium alloys, low- and medium-carbon steels	お問い合わせください。
LACTUCA MSF 5200	Conventional machining of aluminium alloys, low- and medium-carbon steels without formaldehyde releases	お問い合わせください。
LACTUCA MS 7000	Difficult and very difficult machining of cast iron, high-carbon, alloyed, stainless steels and aluminium alloys	お問い合わせください。
LACTUCA MSF 7200	Difficult and very difficult machining of cast iron, high-carbon, alloyed, stainless steels and aluminium alloys without formaldehyde releases	お問い合わせください。
LACTUCA MS 9000	Difficult and very difficult machining of hard metals, stainless steels and titanium: sawing, broaching, cold form tapping and deep drilling	お問い合わせください。
LACTUCA MSF 9200	Difficult and very difficult machining of hard metals, stainless steels and titanium: sawing, broaching, cold form tapping and deep drilling without formaldehyde releases	お問い合わせください。
SPIRIT MS 3000	Conventional machining of cast Iron and low-carbon steels recommended for surlace, cylindrical or centreless grinding	お問い合わせください。
SPIRIT MSF 3200	MConventional machining of cast Iron and low-carbon steels recommended for surlace, cylindrical or centreless grinding without formaldehyde releases	お問い合わせください。
SPIRIT MS 5000	Difficult machining of cast iron, high-carbon steels, alloyed steels and aluminium alloys	お問い合わせください。
SPIRIT MSF 5200	Difficult machining of cast iron, high-carbon steels, alloyed steels and aluminium alloys without formaldehyde releases	お問い合わせください。
SPIRIT ASI 7000	Difficult machining. Dedicated to aluminium alloys with high silicone content	お問い合わせください。
SPIRIT ASIF 7200	Difficult machining. Dedicated to aluminium alloys with high silicone content without formaldehyde releases	お問い合わせください。
SPIRIT WBA 5000	Difficult machining of cast iron, high-carbon steels, alloyed steels and aluminium alloys	お問い合わせください。
SPIRIT WB 7000	Difficult machining of cast Iron, high-carbon, alloyed, stainless steels and aluminium	お問い合わせください。
SPIRIT WBF 7200	Difficult machining of cast Iron, high-carbon, alloyed, stainless steels and aluminium without formaldehyde releases	お問い合わせください。
VULSOL MS 5000	Grinding. Recommended for rolling mill cylinders	お問い合わせください。
VULSOL MSF 5200	Grinding. Recommended for rolling mill cylinders without formaldehyde releases	お問い合わせください。
VULSOL MS 7500	Difficult machining and grinding of steel, steel alloys and non-ferrous metals. Machining of plastics and special optical glasses	お問い合わせください。
VULSOL MSF 7200	Difficult machining and grinding of steel, steel alloys and non-ferrous metals. Machining of plastics and special optical glasses without formaldehyde releases	お問い合わせください。

TREATMENT ADDITIVES FOR SOLUBLE FLUIDS

PRODUCTS	DESCRIPTION	Product Data Sheet
ANTIFOAM MS 30	Anti-foaming recommended in post-treatment. Elimination of the foam formed during use of emulsions and synthetic fluids	お問い合わせください。
EBOTEC BT 80	Curative treatment of aqueous machining, rolling, drawing and wire drawing fluids	お問い合わせください。
CONTRAM CB 3	Cleaning of machine tools before oil change. Recommended for individual tanks and centralized systems	お問い合わせください。

STAMPING AND FORMING OILS

PRODUCTS	DESCRIPTION	Product Data Sheet
MARTOL EP 5 CF	Cutting, forming. For thicknesses < 2 mm	お問い合わせください。
MARTOL EP 65 CF	Cutting, stamping, extrusion of transmission shafts, wire drawing of steels	お問い合わせください。
MARTOL EP 100 CF	Cutting, stamping and drawing of low- to medium-carbon steels	お問い合わせください。
MARTOL EP 235 CF	Cutting, stamping and drawing of low- to medium-carbon bars	お問い合わせください。
MARTOL LVG 25 CF	Mild- and medium-severe stamping operations. For thicknesses < 2 mm	お問い合わせください。
MARTOL EV 10 CF	Mild cutting and stamping operations. For thicknesses from 0.2 to 0.5 mm	お問い合わせください。
MARTOL EV 40 CF	Cutting of steel and aluminium strips For thicknesses < 1 mm	お問い合わせください。
MARTOL EP 1000	For very difficult operations or thicknesses > 5 mm	お問い合わせください。
MARTOL FMO 75 CF	Pre-induction and stamping of aluminium strips for food packaging industry	お問い合わせください。
MARTOL FMO 235 CF	Pre-induction and stamping of aluminium strips for packaging industry	お問い合わせください。
ETIRELF TRS 48	Stamping Blanking	お問い合わせください。

SPARK EROSION

PRODUCTS	DESCRIPTION	Product Data Sheet
DIEL MS 5000	EDM fluid for roughing and finishing operations.	お問い合わせください。
DIEL MS 7000	EDM fluid for semi-finishing and finishing operations.	お問い合わせください。

<< 金属加工のトップページに戻る